Model #22: Merino Sheepskin Seat Saver
Available to fit any saddle, custom made. For a pure soft ride, a rainbow of colors available.
How to attach the seat saver, first, place the seat saver on the saddle, with the loop in front.
If the saddle has a horn, slip this loop over the horn. If it does not, simply let it lay there, centered. take the long strap that is attached to the front.
Now take trhe long strap and pass it UNDER the saddle, long the gullet. At the end of the seast saver is a short strap with a square, drop through through the crupper bar, now pull up the long strap and pass it through this square, then lay the left over strap to make Velcro closure on the strap that is in the center of the gullet.
Now take the elastic straps on either side of the saddle and pass through this strap the stirrups, attached fender and the small flap that sits against the girth ring.
Pull up this strap as far as you can. Repeat on the other side.
There are three sizes in this pas for various saddles, SMALL, MEDIUM LARGE.
Available to fit any saddle, custom made. For a pure soft ride, a rainbow of colors available.
How to attach the seat saver, first, place the seat saver on the saddle, with the loop in front.
If the saddle has a horn, slip this loop over the horn. If it does not, simply let it lay there, centered. take the long strap that is attached to the front.
Now take trhe long strap and pass it UNDER the saddle, long the gullet. At the end of the seast saver is a short strap with a square, drop through through the crupper bar, now pull up the long strap and pass it through this square, then lay the left over strap to make Velcro closure on the strap that is in the center of the gullet.
Now take the elastic straps on either side of the saddle and pass through this strap the stirrups, attached fender and the small flap that sits against the girth ring.
Pull up this strap as far as you can. Repeat on the other side.
There are three sizes in this pas for various saddles, SMALL, MEDIUM LARGE.
Available to fit any saddle, custom made. For a pure soft ride, a rainbow of colors available.
How to attach the seat saver, first, place the seat saver on the saddle, with the loop in front.
If the saddle has a horn, slip this loop over the horn. If it does not, simply let it lay there, centered. take the long strap that is attached to the front.
Now take trhe long strap and pass it UNDER the saddle, long the gullet. At the end of the seast saver is a short strap with a square, drop through through the crupper bar, now pull up the long strap and pass it through this square, then lay the left over strap to make Velcro closure on the strap that is in the center of the gullet.
Now take the elastic straps on either side of the saddle and pass through this strap the stirrups, attached fender and the small flap that sits against the girth ring.
Pull up this strap as far as you can. Repeat on the other side.
There are three sizes in this pas for various saddles, SMALL, MEDIUM LARGE.